Caliper and Compass Set
Subtotal:
$49.90
Wheel Marker 3-in-1
Marking/Mortise & Depth Gauge
With an 8" steel shaft marked in inches and mm and a Solid Brass positioning stop and a beveled hardened steel marker at the end of the shaft, this works beautifully as a Woodworker's Marking Gauge. Included are a mid-shaft stop for additional positioning flexibility and two additional beveled wheel markers to mark out mortises with one stroke. The stop also functions as a rest & guide to keep the cutters perpendicular to the workpiece while marking. With an inside bevel the cutter is pulled snug to the fence, preventing wander while marking. The hardened steel-alloy wheel is flush-mounted (it makes a handy depth gauge) and safely nests in a recess in the brass fence when not in use. A proven modern design.
-
With an 8" steel shaft marked in inches and mm and a Solid Brass positioning stop and a beveled hardened steel marker at the end of the shaft, this works beautifully as a Woodworker's Marking Gauge. Included are a mid-shaft stop for additional positioning flexibility and two additional beveled wheel markers to mark out mortises with one stroke. The stop also functions as a rest & guide to keep the cutters perpendicular to the workpiece while marking. With an inside bevel the cutter is pulled snug to the fence, preventing wander while marking. The hardened steel-alloy wheel is flush-mounted (it makes a handy depth gauge) and safely nests in a recess in the brass fence when not in use. A proven modern design.
California residents: WARNING Proposition 65 notice
WARNINGThis products can expose you to chemicals, including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
You May Also LikeSimilar Items You Might Also Like
Rosewood & Brass Try Squares
Subtotal: $179.00
Clearance
Set of Four Engineer's Squares
Subtotal: $40.00
